Home > Sublimation Paper > A3 MagicTrans Subli-R

A3 MagicTrans Subli-R

Item Code: HTP-02
Item Weight: 0.453 KG
Pieces in carton: 1500
Carton Weight: 32.00 KG
Carton Size: 54x41x36 cm




Loading image. Please wait


Printing Procedure

RICOH-A3 Sublimation is a compatible printing medium for any Inkjet Printer machine. However to reach maximum potential of this printing and transfer paper it is suggested to use original Sublimation Inks on it. Select “Photo Paper” as the paper style and set the standard in “Normal” printing then adjust the quality option to “Photo or Best Photo Quality” to get better results. Never forget that Transfer method always needs the print to b transferred facing the medium, so set the design pattern to Print Mirror Image before printing it on the paper. Print on the bright white side of the paper.

Transfer Procedure

First, check if the print is perfectly dry. If needed, trim down the design and remove the non printed films. Now, remove the back paper and place the printed film directly to the desire location in the medium. Next, place the design on top of the medium and fix the printed paper using heat resistant tape to the item so the paper will not move during the transfer. Finally, press the transfer paper on the medium with the standard heat and pressure settings. When transferring is done, peel the paper starting in one corner gently. Use caution while paper is still hot.

There are different standards for the variety of substrates such as mouse pads, tote bags, fabrics, ceramics, plastics, metal, glass items and many more. Below is the list of suggested settings using RICOH-A3 Sublimation :

Suggested Settings for Mugs mediums would be:

•    Temperature : 180 Degree Celsius
•    Time: 90 Seconds

Suggested Settings for Aluminum mediums would be:

•    Temperature : 180 Degree Celsius
•    Time: 90 Seconds

Suggested Settings for Ceramic Tiles/ Rocks mediums would be:

•    Temperature : 180 Degree Celsius
•    Time: 4 to 6 Minutes

Note: For this item the paper is places down and ceramic is placed on its face down. Heat has to pass through the ceramic. So the heat time will depend on the thickness of the material

Washing and Ironing Instructions

Wash carefully and avoid scratching and damaging the design print. Use cold water only in washing the output product. DO NOT use bleach or any kind in washing the medium. If on fabric place into the dryer immediately after washing and avoid hanging it to dry. When ironing the design medium on a fabric, avoid heating the areas with printed images on it.

General Instructions

It is highly recommended to test print also and wash test one output before producing mass orders to ensure that the ink used is compatible with the medium used.

Keep transfer papers in the plastic bag to avoid from getting moist on the paper until actual use. Check if the container is closed after each use.