Description : ??
Suitable for : ??
Application Instruction
Printing and Preparing image
- The whiter/smoother surface ( without back print ) is the imaging side of the paper.
- Print design on the paper as a mirror image.
- Refer to printing setting; Single-sheet feeding is recommended.
- Before printing final image, product one economy grade paper to test for layout/design.
Printer Type
Print Mode Settings
Print Quality
HP
HP Iron-on Transfer
Normal or Best Setting
EPSON
360 dpi inkjet paper or photo quality paper
720 dpi
CANON
T-shirt Transfer
Default Settings
LEXMARK
Iron-on Transfer
Normal or Best Setting
OTHER
Contact Us
Contact Us
Cut out design
- Do not leave a margin around the edge of the image.
- Use an image with rounded images to avoid corner lift-off after washing.
Preparing for Transfer
- Prepare heat press at 345°F at 174°C or refer to your manufacturer’s specifications.
- Fabric should be 100% cotton; press first if necessary to ensure flatness, then let it cool down.
- Place transfer paper with design facing down in desired position on fabric
- Allow fabric to cool completely, then smoothly and evenly peel away backing paper.
- To facilitate peeling, gently fold the fabric near and edge of the transferred image
Product
Light
Print Side
Down
Printing
Reverse
Silicone Sheet
No
Temp. (°C)
174
Temp. (°F)
345
Pressure
Medium
Time (secs)
20
How to Care ( Washing Information )
- Wait at least 24 hours before washing.
- Fabric should be machine washed separately inside out ( first time only ) in cool or cold wash setting.
- Do not bleach.
- Immediately remove garments from washer. Colors may bleed if left wet too long.
- Tumble dry at warm setting.
- To re-iron fabric after washing, do not iron directly on transferred image.
